Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.10758764
- Product Categories
- Friendly Links
- home > Supply > Jinan acid conveyor belt conveyor belt _ _ Wan and waveform special conveyor belt ribs
Information Name: | Jinan acid conveyor belt conveyor belt _ _ Wan and waveform special conveyor belt ribs |
Published: | 2014-05-17 |
Validity: | 0 |
Specifications: | Limitation |
Quantity: | |
Price Description: | |
Detailed Product Description: | Conventional rubber belt by changing the upper and lower rubber composition are designed to use the adhesive surface of the base fabric in the form of wear-resistant cold conveyor belt, in the long-term operation of the lifting device can be prevented from using the annular rubber belt to enhance the process of swap gum, and better abrasion resistance, long-term work cycle, the higher the intensity of the band body integrated practical effect, to enhance this new structure includes a belt layer, and is located at the top surface of the rubber material several layers of canvas middle conveyor belt reinforcing layer, in which a layer of wear-resistant design of the bottom fabric layer of the base fabric abrasion resistant conveyor belt, at the bottom fabric layer by abrasion rubber material and the reinforcing layer and the upper layer of canvas interconnected undone synthesize a whole in order to solve the existing deficiencies tape replacement method, the industry has devised an easy job to replace the transfer belt more rapid method of operation: The main use of the equipment and tools, including cranes, belt tugs, Belt splint and sling, follow these steps: 1 strap the beginning of the long section of the old trap acid conveyor belt, and then the crane hook to long segment of the old band pulling up; 2 long segment of the old belt when lifting crane to travel limits After passing through the tape with a crane arm to replace the tug had pulled away from the exit of the band to replace long placed on the ground, then move belt replacement strap at the outlet and repeat step five; 3 measuring device to the rear annular rubber conveyor idler pulley with replacement from the tugboat according to the measured distance on a new belt has not been replaced for the remaining cut; 4 for the replacement of the remaining portion of the new belt end away from the old belt replacing a short segment of the outlet end of the connecting plate by an adhesive tape; 5, the short segment ends near the old belt from the outlet of the end for the beginning through the belt replacement tugboat; Jinan acid conveyor belt conveyor belt _ and _ square waveform sidewall conveyor belt is provided by special Million and rubber products. This information consists of: providing Shandong with square and Rubber Products Co., Ltd. (www.wanhexiangjiao.com), we are business alliance member, the integrity of the whole network authentication provider. Feel free to contact us, contact: Wang Xiaowei |
Admin>>>
You are the 28161 visitor
Copyright © GuangDong ICP No. 10089450, Shandong with Wan and Rubber Products Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 28161 visitor
Copyright © GuangDong ICP No. 10089450, Shandong with Wan and Rubber Products Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility