Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.10758764
- Product Categories
- Friendly Links
- home > Supply > Wan and pattern conveyor belt, pattern conveyor belt [supply], Qingdao pattern conveyor belt
Information Name: | Wan and pattern conveyor belt, pattern conveyor belt [supply], Qingdao pattern conveyor belt |
Published: | 2014-01-27 |
Validity: | 0 |
Specifications: | Limitation |
Quantity: | |
Price Description: | |
Detailed Product Description: | Million and pattern conveyor belt, pattern conveyor belt [supply], Qingdao pattern conveyor belt and rubber products provided by the square. We are Shandong with Wan and Rubber Products Co., Ltd. (www.wanhexiangjiao.com) located at: Shandong Weifang specializes in: rubber conveyor belt, ring belt, rib belt, acid and alkali resistant conveyor belt, large angle conveyor belt, and then accordance with the requirements pattern conveyor supply will be cut circular rubber film sample, if the thickness is not enough, the film can be made of stacked pattern conveyor belt, the volume should be slightly larger than the volume of the cavity quality pattern conveyor belt, shaped in the garden the bottom surface of the sample number and curing conditions pasted paper labels, required by the curing temperature regulation and control the temperature of the plate, so that a constant, the mold is closed flat on preheated to the required curing temperature within the range of plus or minus once and maintained at this temperature for twenty minutes, the continuous vulcanization can not preheated hot plate vulcanizing each allowing only put a mold curing press work, curing pressure provided by the pump, the pressure gauge indicates the vulcanization, high and low pressure by adjusting the pressure regulating valve, the check number and the rubber vulcanization conditions billet to speed as quickly as possible into the preheated mold, mold immediately placed flat central, upper and lower layers of vulcanized models are in the same After applying pressure position, the plate rises, when pressure gauge to the desired working pressure relief vent properly for about three to four times, and then the pressure reaches the maximum, counting curing time, curing arrive at the scheduled time immediately Relief Kai mold, remove the sample for new pattern conveyor belt vulcanizing machine manufacturers, mold, exhaust, curing time and Kai are automatic control mode, the belt vulcanized rubber samples cut edge, parked at room temperature for ten hours After the performance test may be conducted; belt conveyor accessories low power consumption. As the material with almost no relative movement of the conveyor belt, not only the running resistance is small, and the wear of cargo and fragmentation are small, and high productivity. These are conducive to lower production costs. Belt Conveyor Accessories conveyor line adaptable and flexible. Line length according to the need. As short as a few meters, length up to 10km or more. Can be installed in a small tunnel above the ground can also be set up in the traffic chaos and danger areas. |
Admin>>>
You are the 28161 visitor
Copyright © GuangDong ICP No. 10089450, Shandong with Wan and Rubber Products Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 28161 visitor
Copyright © GuangDong ICP No. 10089450, Shandong with Wan and Rubber Products Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility